Cookies helfen uns bei der Bereitstellung unserer Dienste. Durch die Nutzung unserer Dienste erklären Sie sich damit einverstanden, dass wir Cookies setzen.
Cookies help us in providing our services. By using our services, you agree that we set cookies.
OK
TPA

EtherSens Control


Monitor and protocol of digital and analog Input/Outputs

  • Logical evaluation (small control tasks) in the device
  • Data-transfer via TCP/IP in a DB in S7-PLC

  • Logical evaluation (small control tasks) in the device
  • Data-transfer via TCP/IP in a DB in S7-PLC
Data backup S5-PLC on FTP-Server
Produkbild

S5-PLC triggered DB-backup/-restore without additional PC via PG-socket and Ethernet on FTP-server

Data backup S5-PLC on FTP-server via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via PG-socket and Ethernet to FTP-server

Data backup S5-PLC on SD-card
Produkbild

S5-PLC triggered DB-backup/-restore without additional PC via PG-socket and Ethernet on SD-card

Data backup S5-PLC on SD-card via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via PG-socket and Ethernet to SD-card

Data backup S5-PLC on USB-stick
Produkbild

S5-PLC triggered DB-backup/-restore without additional PC via PG-socket and Ethernet on USB-stick

Data backup S5-PLC on USB-stick via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via PG-socket and Ethernet to USB-stick

Data backup S7-PLC PN-port on FTP-server
Produkbild

S7-PLC triggered DB-backup/-restore without additional PC via PN-port on FTP-server

Data backup S7-PLC PN-port on FTP-server via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via PN-port to FTP-server

Data backup S7-PLC PN-port on SD-card
Produkbild

S7-PLC triggered DB-backup/-restore without additional PC via PN-port on SD card

Data backup S7-PLC PN-port on SD-card via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via PN-port to SD-card

Data backup S7-PLC PN-port on USB-stick
Produkbild

S7-PLC triggered DB-backup/-restore without additional PC via PN-port to USB-stick

DB-Backup/Restore S7-PLC PN-port on USB-stick via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via PN-port to USB-stick

Data backup S7-PLC over MPI/Profibus on FTP-server
Produkbild

S7-PLC triggered DB-backup/-restore without additional PC via MPI/Profibus on FTP-server

Data backup S7-PLC over MPI/Profibus on FTP-server via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via MPI/Profibus to FTP-server

Data backup S7-PLC over MPI/Profibus on SD-card
Produkbild

S7-PLC triggered DB-backup/-restore without additional PC via MPI/Profibus on SD-card

Data backup S7-PLC over MPI/Profibus on SD-card via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via MPI/Profibus to SD-card

Data backup S7-PLC over MPI/Profibus on USB-stick
Produkbild

S7-PLC triggered DB-backup/-restore without additional PC via MPI/Profibus on USB-stick

Data backup S7-PLC over MPI/Profibus on USB-stick via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via MPI/Profibus to USB-stick

Data acquisition/logging
Produkbild

By connecting a line-recorder to the EtherSens-device anyone without network-knowledge can visually capture and further process the log.

Detecting and controlling
Produkbild

Control with the EtherSens-devices your systems and determine the switching-points at which the device must react. Either it performs an action or inform you via email or SMS.

Relaycontacts 230VAC/16A directly over WIFI/LAN
Produkbild

Switch with the EtherSens Control with relay-output easily and directly over LAN or WIFI up to 230VAC/16A, switchable over web-browser, TCP/IP-protocol or PLC-controlled. At the same time you monitor the switching-states on the optional SD-card or on the FTP server.

Supply voltage: 24V DC +/- 20%
Power consumption: 10 watt (without possibly switched outputs)
Display: WEB-Browser
1 status LED bicolor
Handling/Configuration: WEB-Browser
Interfaces: 12 x digital-IO switchable as
 - Input (24VDC max. 8k2 (PullUp external) / min. 1.6mA ) or
 - Output (24VDC 400mA)
4 x Analogue Input V1.0 (0-5V)
 - opt. with ext.Shunt 0/4-20mA
 - opt. with ext. restistance 0-10/24/50V
4 x Analogue Input V1.1 (switchable between U, I, differential)
 - Free configurable voltage-inputs with full 15-bit resolution:
   0-50V, 0-40V, 0-20V, 0-10V, 0-5V, 0-4V, 0-2V,
   0-1V, 0-0,5V, 0-0,25V
 - Free configurable differential voltage-inputs with full 15-bit
   resolution AI1 <-> AI2 and AI3 <-> AI4:
   +/-50V, +/-40V, +/-10V, +/-5V, +/-4V, +/-2V, +/-1V, +/-0,5V, +/-0,25V
 - Free configurable current-inputs with full 15-bit resolution:
   0-20mA, 4-20mA
 - sample-rate of AD-converter can be selected:
  - fast = fast conversion / short precision
  - balanced = middle conversion / middle precision
  - exact = slow conversion / high precision
 - Measuring ranges after changing are calibrated to:
  - offset for 0V / 0mA
  - slope of voltage / current
    (ideal for end of measuring-range / full-scale)
 - Relative values can be configured to the original voltage- /
   current-values. For e.g.:
  On the voltage-input 10V were measured 5V,
  relative minimum = 0 kg, relative maximum = 100 kg,
  so the displayed-value is 50 kg
  Is minimum and maximum configured as 0 the measured
  voltage- / current-value will be displayed.
4 x analogue Output 0/4-20mA (source-power 24V)
Slot for microSD
Antenna-connector SMA(f) (2.4 GHz IEEE 802.11b/g)
10/100BaseTX RJ45-ethernet-plug
Button for factory settings
Overvoltage category: CAT IV
Insulation value
network <=> mains voltage:
1,5 KV
Operating temperature: 0 - 55°C
Case: ABS-plastic case V0
Dimensions: 100 x 112 x 45 mm
Scope of delivery:
  EtherSens Control
WIFI-stub-antenna

extensions:

9220-GYRO-SENS-312
Gyro-Sensor 312 für EtherSens
Measuring range: ±1.5g / ±3g / ±6g / ±12g 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m
INFOMAIL
by e-mail
9220-GYRO-SENS-313
Gyro-Sensor 313 für EtherSens
Measuring range: ±0.5g / ±1g / ±2g / ±4g 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m
INFOMAIL
by e-mail
9220-SEG-ANZEIGE
Segment-display for EtherSens
4 Digit 14 segment-display RED 0,56" high in wall-mounting case 5V DC supply (from I2C-interfaceport) I2C-connection
INFOMAIL
by e-mail
9220-SONNE
Sun-light-sensor for EtherSens

max. 220k Lux (switchable ranges) 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m
INFOMAIL
by e-mail
9220-U-I-BOX
U-I-box for EtherSens

max. 1000V DC / 40A 24V DC supply 20cm power-cable 4mm2 with Amphenol-plug I2C-connection 1m
INFOMAIL
by e-mail
9230-AIO
Extension Analog-IO V1.0

Extension-board for EtherSens-devices 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) Power consumption: 4W
INFOMAIL
by e-mail
9230-AIO-V1.1
Extension Analog-IO V1.1

Extension-board for EtherSens-devices 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) Power consumption: 4W
INFOMAIL
by e-mail
9230-DIO
Extension Digital-IO

Extension-board for EtherSens-devices 12 x digital IN or OUT 24VDC 400mA free config with software Power consumption: 4W
INFOMAIL
by e-mail
9230-EI2C-3.3V
Extension with ext. galv. separated I2C 3.3V

Extension-board for EtherSens-devices with galvanic separated external I2C-connector for 3.3V Power consumption: 2W
INFOMAIL
by e-mail
9230-EI2C-5V
Extension with ext. galv. separated I2C 5V

Extension-board for EtherSens-devices with galvanic separated external I2C-connector for 5V Power consumption: 2W
INFOMAIL
by e-mail
9230-ENERGY
Extension Energy-IO

Extension-board for EtherSens-devices Energy-analysis (EN 50470-1 EN 50470-3) L1, L2, L3, N realtime analysis Up to 8000 measurements / second Hz / cos phi / power-factor Energy consumption kWh For Rogwski-coils up to 0,5V
INFOMAIL
by e-mail
9230-GG
Bigger Case
Width 90mm instead of 45mm
INFOMAIL
by e-mail
9230-LTE
Extension LTE-modem

LTE-modem-board for EtherSens-devices Send/receive of SMS-messages Communication from/into internet Power consumption: 6,5W
INFOMAIL
by e-mail
9230-MIO-232
Extension RS232-IO

Extensionboard for EtherSens-devices V1.0 for RS232 (RxD, TxD) Power consumption: 2W
INFOMAIL
by e-mail
9230-MIO-422
Extension RS422-IO

Extensionboard for EtherSens-devices V1.0 for RS422 (4-wire) Power consumption: 2W
INFOMAIL
by e-mail
9230-MIO-485
Extension RS485-IO

Extensionboard for EtherSens-devices V1.0 for RS485 Power consumption: 2W
INFOMAIL
by e-mail
9230-MIO-TTY
Extension TTY-IO

Extensionboard for EtherSens-devices V1.0 for TTY (incl. 2x current-sources) Power consumption: 2W
INFOMAIL
by e-mail
9230-NT-230V
Power-supply-rack-unit 230V

Input voltage: 100 - 240VAC 50-60Hz Output voltage: 24V DC Power: 4W
INFOMAIL
by e-mail
9230-RIO-230V
Extension 230V Relay-IO

Extension-board for EtherSens-devices Supply voltage: 230V AC 4 x relay-OUT 230VAC/16A Power consumption: 2,5W
INFOMAIL
by e-mail
9230-RIO-24V
Extension 24V Relay-IO

Extension-board for EtherSens-devices Supply voltage: 24V DC 4 x relay-OUT 230VAC/16A Power consumption: 4W
INFOMAIL
by e-mail
9230-USB
Extension USB-port

USB-port for EtherSens-devices (data storage) Extension for: - DB-backup/restoure-function - CSV-recording Maximum current: 200mA for 5V DC
INFOMAIL
by e-mail

accessories:

9230-ANT-WAND
Stationary Wifi-antenna for wall fastening
for EtherSens-devices, cable length: 5m for indoor and outdoor use incl. bracket
INFOMAIL
by e-mail
9230-LTE-ANTW
Stationary LTE-antenna for fixed mounting
for EtherSens-devices LTE-modem cable length: 2m
INFOMAIL
by e-mail
9230-SD-32
Micro-SD-card 32GB

for EtherSens-devices SDHC class 10
INFOMAIL
by e-mail
9240-SDÜ
Option Safe S7-PLC-data-transmission
Function extension for recognition of save data-transmission by toggle bit or counters in the S7-PLC. In case of a failure, a default configuration is mapped to the outputs.
INFOMAIL
by e-mail
9352-WLAN-ANT
Magnetic base antenna

for S7-WLAN-Bridge, WLAN-Klemme, EtherSens cable length: 3m
INFOMAIL
by e-mail
9391.1
24V DC power-supply unit 625mA

Primary 110V - 240 VAC Euro+USA-plug
INFOMAIL
by e-mail
9636-CROSS
Cross-cable 3m Cat5+, shielded

RJ45 plug <=> RJ45 plug, twisted pinning
INFOMAIL
by e-mail
9636-TCPIP
Patch-cable 3m, Cat5+, shielded

RJ45 plug <=> RJ45 plug, 1:1
INFOMAIL
by e-mail
9636-TCPIP.02M
Patch-cable 0.25m, Cat5e, shielded

RJ45 plug <=> RJ45 plug, 1:1
INFOMAIL
by e-mail
9636-TCPIP.1M
Patch-cable 1m, Cat5e, shielded
RJ45 plug <=> RJ45 plug, 1:1
INFOMAIL
by e-mail

Variationen:

9200-A-24V
EtherSens Control 24V Analog-IO V1.0

Supply voltage: 24V DC 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time
INFOMAIL
by e-mail
9200-A-24V-V1.1
EtherSens Control 24V Analog-IO V1.1

Supply voltage: 24V DC 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time
INFOMAIL
by e-mail
9200-AA-24V
EtherSens Control 24V 2x Analog-IO V1.0

Supply voltage: 24V DC 8 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 8 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time
INFOMAIL
by e-mail
9200-AA-24V-V1.1
EtherSens Control 24V 2x Analog-IO V1.1

Supply voltage: 24V DC 8 x Analogue Input (switchable between U, I, differential) 8 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time
INFOMAIL
by e-mail
9200-AD-24V
EtherSens Control 24V Analog-/Digital-IO V1.0

Supply voltage: 24V DC 12 x digital IN or OUT 24VDC 400mA free config with software 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time
INFOMAIL
by e-mail
9200-AD-24V-OW
EtherSens Control 24V Analog-/Digital-IO V1.0 o. LAN

Supply voltage: 24V DC 12 x digital IN or OUT 24VDC 400mA free config with software 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) Only LAN-interface
INFOMAIL
by e-mail
9200-AD-24V-V1.1
EtherSens Control 24V Analog-/Digital-IO V1.1

Supply voltage: 24V DC 12 x digital IN or OUT 24VDC 400mA free config with software 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time
INFOMAIL
by e-mail
9200-AR-24V
EtherSens Control 24V Analog-/Relay-IO

Supply voltage: 24V DC 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) 4 x Relay-OUT 230VAC/16A LAN and WIFI-interface integrated function to the same time
INFOMAIL
by e-mail
9200-AR-24V-V1.1
EtherSens Control 24V Analog-/Relay-IO V1.1

Supply voltage: 24V DC 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) 4 x Relay-OUT 230VAC/16A LAN and WIFI-interface integrated function to the same time
INFOMAIL
by e-mail
9200-D-24V
EtherSens Control 24V Digital-IO

Supply voltage: 24V DC 12 x digital IN or OUT 24VDC 400mA free config with software LAN and WIFI-interface integrated function to the same time
INFOMAIL
by e-mail
9200-DD-24V
EtherSens Control 24V 2x Digital-IO

Supply voltage: 24V DC 24 x digital IN or OUT 24VDC 400mA free config with software LAN and WIFI-interface integrated function to the same time
INFOMAIL
by e-mail
9200-DR-24V
EtherSens Control 24V Digital-/Relay-IO

Supply voltage: 24V DC 12 x digital IN or OUT 24VDC 400mA free config with software 4 x Relay-OUT 230VAC/16A LAN and WIFI-interface integrated function to the same time
INFOMAIL
by e-mail
9200-R-230V
EtherSens Control 230V Relay-IO

Supply voltage: 230V AC 4 x Relay-OUT 230VAC/16A LAN and WIFI-interface integrated function to the same time
INFOMAIL
by e-mail
9200-R-24V
EtherSens Control 24V Relay-IO

Supply voltage: 24V DC 4 x Relay-OUT 230VAC/16A LAN and WIFI-interface integrated function to the same time
INFOMAIL
by e-mail

Automatic-mode

Other downloads

Extension

Support-videos